• Use the default user name admin and password admin for first setup.

• Click on Basic ->Connections on left panel

• If you are configuring the CPE first time, you need to delete the existing PVC0. For this click on edit icon (Icon in the column Note), scroll down the page and click on delete. 

• Now click on New and enter the VPI/VCI value as 0 / 35.

• Select encapsulation as LLC

• Default route : Enable

• Enter the username and password ( provided by BSNL).

• Use DNS :Enable

• Click on Apply.

• Save the configuration by clicking on Save All on left panel.

  

Please note that the wireless security is most important to prevent any unauthorized access to/through your modem although LAN/USB connectivity is used

How to configure Configure Wi-Fi security ?

• Click on ‘WLAN’ on left panel and select ‘WEP’ (tick the check box). Enter the 13 digit WEP Key as you desire (only hexadecimal numbers i.e.0-9,A-F) and click on Apply. 

• Save the configuration by clicking on ‘Save All’.

• Wireless connectivity will be lost when modem reboots.

Wi-Fi Configuration in PC/Laptop

The above CPE configuration makes wi-fi secured network so no body else should be able to access Internet thorugh your connection. Hence you need to configure same WEP key in your PC/Laptop which you have entered in CPE wi-fi security configuration. For this go to the properties of Wi-Fi connection, select the tab Wireless Networks. Then select the wi-fi network name ( more than one networks may be present in your area, identify your network by SSID name which is configured in modem. Normally the CPE model name ( i.e. WA1003A) is factory default SSID setting) and click on Properties. Look for field Data Encryption and network ID, select WEP as Data Encryption and enter the network ID which you have entered in CPE configuration as Encryption Key.

            These steps may be different for different client Wi-Fi hardware/software. The screen shots of a typical example are given below.